Text Layer Text File Metatag

Most Common Values for Text Layer Text

Value	Count
www.raybabay.us, @raybabyjournal, 7029-K Haycock Road, Falls Church, Virginia 22042 United States	9
Powered by ResourceXpress Designed and Manufactured in the UK - www.resourcexpress.com , TM, TM, Model Number: Qubi3 Model H Serial Number: Q3Hxxxxxx Power Supply: Micro USB FCC ID: 2AB38-QUBI3H This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.	6
, This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.	6
- Block Diagram - Schematics - Operational Description - BOM - Tune up procedure, 2AC3S-TALKASET3	6
2AC3S-TALKASET3	6
Bluetooth Earbud Pairing, 1. Turn on your phone Bluetooth Settings, 2.Starting with the earbuds off. Press and hold center power button DO NOT RELEASE until you hear ‘Power On,Pairing’ *This will take 8 seconds and there will be a pause between Power On and Pairing. You will also see flashing red and blue lights around the + button on the control console. , 3. Find device 008 in your Bluetooth settings. Select to connect., 4. You are now ready to listen to music or make calls using your Bluetooth Earbuds.	5
©2017 Meross. All rights reserved, What devices can I control with the Smart Plug Mini? You can control lights, fans, humidifiers, portable heaters, and any small appliances in accordance with MSS110’s specifications (up to 15A output). What should I do when the LED is lit a solid red? A solid red indicates no internet connection. You can troubleshoot the following: ·Check the main WiFi’s internet connection. ·Make sure that main WiFi’s password hasn’t been changed. ·Make sure your MSS110 is not too far from the main WiFi. ·Factory reset MSS110 and try to add it again. , Frequently Asked Questions, Solid amber: Initialization/ Reset/ Firmware upgrading mode. Flashing amber and green slowly: Configuring mode. Flashing green rapidly: WiFi connecting mode. Solid green: Successfully connected, and the socket is at ON status. Solid red: No Internet connection, and the socket is at ON status . Ｏff: The socket is at OFF status or the MS110 is powered off. Ｐress to turn the socket ON or OFF. Press and hold (for 5 seconds) until LED is lit a solid amber to initiate factory reset process. , LED and Button Rules	5
carefully read this operating manual in full to use this unit properly store manual in a safe place for future reference , FEATURES, Power supply for Unit, Operating Bluetooth Speaker, Play / Pause / Answer Button (2), Power / Bluetooth/ AUX Button (MFB) (1), NEXT 8/ VOLUME UP + (3) , PREVIOUS 7/ VOLUME DOWN - (4) , LED Indicator (7), Microphone, Micro SD Card Slot (5) , Micro USB Charging port (8) , Sport speaker with audio controls, Sport speaker with audio controls, Bluetooth®, Model: XBS9-1009 BLK/BLU/RED/PNK, Bluetooth speaker, To charge your Xtreme Sport Bluetooth Speaker battery, connect the supplied cable to the Micro USB(8) charging port and connect the other end to a USB power outlet (5V adaptor not included) for a minimum of three [3] hours. , 877-999-8041 \| www.xtremecables.net, Turn the Speaker on by Sliding the Power Button(1) to until LED power indicator (5) flashes blue. , 1., The speaker will enter pairing mode. Enable Bluetooth search mode on your audio device and search for pairing name Sport Speaker and select it on your audio device. Once the speaker has successfully connected the LED indicator (7) will stop flashing and remain blue. , 2., Press the Answer Button (2) to answer calls, pause, play and hang up call. , 3., To change to the next track, short slide the “8” (3) To raise volume, long slide the the Volume + Button (3), 4., To change to the previous track, short slide the “7” (4) To raise volume, long slide the the Volume - Button (4), 5., Insert microSD card into microSD port (5) and slide the power button (2) to P3 to enjoy music stored on the card. , 6., Slide & Hold the Power Button (1) to P3 to enable the built in FM radio. Click the play/pause button (2) to search for a new station. You will need to pair again to listen to a bluetooth enabled device (see step 1), Sliding the Power Button (1) to OFF will power off the speaker., 7., , , 8., Please make sure battery is fully charged. For best results (or to charge faster) do not use the speaker while charging. , Built-In Mic for hands-free conversation through your phone, Micro USB charging cable included, ON/OFF power button	5
Step 2: Sign in with your exsting parent Gmail account. This will link the devices and give thte parent the ability to manage the Tanoshi 2-in1 device settings. We recommend with a Gmail account on your phone for fast and easy ?????, *Child and Parent setup together, No, it’s for adult , If age entered is 13 or older, Family Link will not be activated !!, Set up the device with your new or existing gmail account., enter child’s real age, Step 1: Create a NEW Google account for your child under the age of 13. A pre-teen account is required for Family Link parental controls to be activated. If one enters a pre-existing Google account, or a new account, with age 13+ then Family Link will not be activated. , , Yes!, Setting up for child use?, Set Up, 2-in-1, Please follow the set up process below., enter child’s name, create child’s gmail, Click!, Click!, Click!, TM, Android and Gmail are trademarks of Google LLC. Tanoshi is a trademark of Tanoshi Inc. All other trademarks belong to their respective owners., Connect to your local Wifi	5
5, 振兴中华测绘天下, LT40智能采录的先行者, 本产品标配清单见上表，硬件详细说明书参见以下官网，只需在电脑端浏览器打开www.huace.cn网址，打开“技术支持/华测相关下载/GIS产品/说明书”目录，下载“安卓云图使用说明书”到电脑即可观看学习。, 特别声明, 配置清单, 10, 保修卡, 产品保修条例此保修条例适用于上海华测导航技术股份有限公司在中国地区出售的产品，保修期从客户购买之日起计算，本公司向客户保证其所生产与出售的产品在定义的保修期内：一、包换原则：自购买之日起一年内，产品出现非人为损坏的故障，导致无法正常使用，公司将无偿给客户更换。二、属于下列情况的将不转载本条例范围之内：（1）机身编号发生撕毁、涂改的；（2）超过有效保修期和保修范围的，保修单不符、涂改、丢失的；（3）一切人为损坏：自行拆机、联机烧毁；（4）未按使用说明书要求使用、维护、保养而造成损坏的；（5）任何不可抗力导致的损坏或者保修变动；三、处理流程：保修期内产品出现故障的，我们将安排相关人员对收到的产品进行初步问题鉴定，10个工作日内处理完毕；如在此期限内不能排除机器故障的，销售单位将提供同等级的产品借用给客户，以保证客户的正常工作。, 5, 保修卡, 用户联产品型号：................................................ 产品编号：................................................ 客户单位：................................................ 购买日期：................................................ 售后电话：................................................ 投诉电话：.... ........................................... 检验单位：销售单位：（盖章）（盖章）注意：如本卡没有供货单位或销售单位盖章，将不为产品客户服务中心认可。, 400-620-6818, 400-620-6818, LT40系列, 4, 合格证, 本产品经检验符合标准要求上海华测导航技术股份有限公司, 产品型号：................................................ 产品编号：................................................ 生产日期：................................................ 检验员：................................................ 检验日期：................................................ 检验标准：................................................ 出厂日期：................................................ 检验单位：（章）, LT40系列, Q/VEDL 1-2014, 7, 2. Please insert SIM card and Micro CD card as shown in the following illustration., Please follow the instructions below to install correctly. After installation, long press the power button to turn it on. 1. Power off LT40, unlock it and pull out the back cover., LT40 Installation, LT40 Back View, 1D/2D Barcode （Optional）, Nameplate Model, GNSS Module, Flash Light, Speaker, Unlock Direction, Nameplate LOGO, Back Camera, 8, Indicator light, Front Camera, Volume Up, Volume Down, Left Function Key, Right Function Key, Power Button, Speaker, Microphone, Headphone Jack, Charging/Data Interface, LT40 Front View, 3, 版权所有上海华测导航技术股份有限公司保留一切权利。版本号：2.0 发布日期：201508, 本资料著作权属上海华测导航技术股份有限公司所有。未经著作权人书面许可，任何单位或个人不得已任何方式摘录、复制或翻译。对本手册中的印刷错误与最新资料不符之处我们会及时改进。这些改进会编入新版手册中不再另行通知，上海华测导航技术股份有限公司保留最终解释权。本手册中的图片仅为示意图，如果图片和实物不一致，请以实物为准；有关手持机结构、电池与充电器的其他相关参数请参见实物。根据您所购买产品的型号及功能不同，随机附带的配件会有所不同，请以包装盒内实物为准。, 法律声明, 2, Thanks For Using CHC Product, LT40 Series Quick Guide	4
FCC STATEMENT, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. , NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help., Uses 4 x “ AA” 1.5V Batteries(Not included), Uses 2 x “ AA” 1.5V Batteries(Not included), Uses 2 x “ AA” 1.5V Batteries(Not included)	4
, to this unit	4
:20778-AEHW4B1	4
Thank you for your purchase. This is a convenient Bluetooth controller used for mobile control, tablet, TV box, PC, VR etc. It has the functions of wireless mouse, game controller, music playing, e-book page turning, PPT etc, and supports the system of ISO, Android, Windows and so on. , System requirement: Compatible with iPod/ iPhone / iPad and most of Android tablet and phone., 0mA, Standby/power off current, DC5V<120mA, 2-10 m, About 20 hours , Recharging current , Work distance, Continuous working time , 3.0, Bluetooth version, Battery capacity, 120 mAH, 1005018 mm, Model, PL-88, 7. Parameters, 5. System failure reset When system fails, like connection failure, it can be reset as follows: On power off press button A, B, X and Y at the same time, then press power on. When the red light is on, press direction keys separately. The blue light will flash for seconds and it reset successfully., Volume-, Esc, OK, Menu, Right , UP, Down, Same as Media Mode, Esc, Mouse mode (only for Android system) It’s a controller for Android mobile phone, PC, and TV box. In mouse mode, the controller will turn vertical. Operation are shown in the figure,, Android Shutter/ IOS Mute , Home, , Android game instruction In the main interface, if the controller can move cursor: key A is OK button, Key B is Back button, then means you mobile can support international standard games. Android game has controller classification in game market generally, just download game(like Metal Slug, Boxing champion 97 and so on), and connect with Bluetooth then play directly. IOS game instruction Game download: enter into APP store or other Apple store , search “icade”, then download and install, like Akane Lite, Brotherhood , TTR Premium etc. Before play games, please set keyboard input mode to English input and can input English letter then ok. Next, please connect with Bluetooth and enter games then play., Mode Switch, OFF/ON, ABXY, Direction Key, Game mode, Media mode, The key “M” doesn’t work on VR system. , Game Mode, Media Mode, IOS System, Media Mode, Game Mode, Mouse Mode, Android System, Button M is the mode switching key, press M and enter into next mode except on the VR system., 3.Mode transfer sequence, 4. Key functions, After power on, on Android system blue LED indicator will flash, On IOS system red indicator will flash. The device will enter into the Bluetooth pair mode automatically to find the address and name of this device, click then can connect. After connection, LED indicator light will be off. , IOS VR System, Android VR System , IOS System, Android System, Press Button A, Press Button Y, Press Button X, Press Button B, Device Name, System, Power ON, red, low energy warning is blue., f) On IOS and IOS VR system, indicator light is red, low energy warning is blue., using mode., e) Directly switch to ON and enter into the last using mode., d) For IOS VR:Press key “A” then moved switch ON., b) For Android: Press key “B” then moved switch ON., , a) For IOS: Pess key “X” then moved switch ON . , Press “start + A” at the same time, the red light will flash, and then it is on IOS VR system. It’s Bluetooth name is “VR Play”.(Note: this system supports storm mirror only) On android VR system, it’s compatible with 3D playing, TV controller and so on.(Move cursor with direction keys and enter into application with “OK” button) , , 1. Power ON Mode, Product Introduction, MANUAL, Game Controller PL-88, Multifunctional, Bluetooth Game Controller , , Basic Instruction, Entertainment, Game, Parameters, Warm Tips, c) For Android VR: Press key “Y” then moved switch ON, 2.Pair and connect, , , , , Note: If no connecting with Bluetooth device in 3 minutes, system will power off automatically. , , After opening music player, the controller music playing, pausing and skipping and so on(not every player can rewind and fast-forward). Key B is the mute button on IOS system, and is the shutter (combination key of volume+ and enter)., Next, Prev., Rewind, Fast-forward, Play/ Pause, Volume+/ IOS Shutter, Volume-, Direction key, OK, Left, Volume+, VR Mode Press the key “Y” then moved swtich ON, When blue light flash, and it is on android VR system It’s Bluetooth device name is “VR Play”., , “VR Play” is the exclusive mode for 3D videos. If you want to switch to other mode, please power off and follow the instruction above. On IOS system enter into Appstore, search “Storm Mirror” or scan the QR code above to download., 6. Download location The following downloads of Game & VR platform:, Happy Chick , 3D Player, Grid to the cloud game: http://www.51ias.com/ Grape game hall: http://www.putaogame.com/, Size, Warm Tips: No notice for the changes of the product's parameters. It was authorized several patents and imitation is prohibited.	4
a/, 2.4GHz, 5GHz, ARM-A53 @ 1.5GHz , 2GB, 32GB, FHD	3
Scannez le code QR ci-dessus pour télécharger l'application; Compatible avec Android 4.4.4 ou version supérieure, version iOS 7.0 ou supérieure, 3, 2, MANUAL (français) , Xtreme garantit ses produits pour une année contre les défauts de fabrication sous l'usage régulier du consommateur avec la réception originale de l'achat au détail. Nous croyons en nos produits et nous voulons vous fournir un remplacement, si nécessaire, mais nous devons connaître le problème alors que le produit est encore sous garantie. Si vous découvrez un défaut couvert par cette garantie, contactez-nous pour recevoir un remplacement. Pour utiliser la garantie des produits, le client doit fournir la preuve du reçu des détaillants. * Tout client hors des États-Unis sera responsable des frais d'expédition et de manutention si un remplacement est requis qui n'est pas dû à un défaut de fabrication. La garantie de Xtreme est limitée à nos produits uniquement. Notre garantie ne couvre pas le coût de remplacement ou de réparation d'un accessoire tiers, d'un appareil électronique ou d'un bien personnel. Pour obtenir des instructions sur la façon d'obtenir un service de garantie pour votre produit, veuillez contacter le service à la clientèle [email protected] , Contenu du colis: Enceinte d'eau avec ventouse Câble de chargement , Garantie un an , 855-999-8041 \| www.XtremeCables.com, ar blaster, Dispositif bluetooth pour les jeux de réalité augmentée, Open the battery cover and install 2 x AAA batteries (not included), then close the battery cover. For first time use, scan the QR code below to download the app from the App Store or Google Play Store. Activate the Bluetooth function on your smartphone and open the App. To turn on your AR Blaster, Hold the On/Off button for 3 seconds. (Note: Your AR Blaster is on if the LED indicator turns blue when you pull the trigger.) When trigger is pulled, AR Blaster and smartphone are paired. Once paired, Pull open expandable smartphone holder on top of AR Blaster and place phone securely in holder. Select game on your smartphone by touching the selected game on the phone screen. When finished playing or switching to another smartphone, hold On/Off button for 3 seconds to power off. (Note: Your AR Blaster is off if the LED indicator does not light up when you pull the trigger.), Scan QR code above to download; compatible with Android version 4.4.4 and later, iOS 7.0 and later, 1. 2. 3. 4. 5. 6. 7. 8. , Operating the AR Blaster, Ouvrez le couvercle de la batterie et installez 2 piles AAA (non fournies), puis fermez le couvercle de la batterie. Pour une première utilisation, numérisez le code QR ci-dessous pour télécharger l'application depuis l'App Store ou Google Play Store. Activez la fonction Bluetooth sur votre téléphone intelligent et ouvrez l'application. Pour allumer votre AR Blaster, maintenez le bouton Marche / Arrêt pendant 3 secondes. (Remarque: votre AR Blaster est activé si l'indicateur LED devient bleu lorsque vous tirez le déclencheur.) Lorsque le déclencheur est tiré, AR Blaster et le smartphone sont appariés. Une fois appariés, retirez le support de smartphone extensible sur AR Blaster et placez le téléphone en toute sécurité dans le support. Sélectionnez le jeu sur votre smartphone en appuyant sur le jeu sélectionné sur l'écran du téléphone. Lorsque vous avez terminé la lecture ou que vous basculez sur un autre smartphone, maintenez le bouton Marche / Arrêt pendant 3 secondes pour éteindre. (Remarque: votre AR Blaster est éteint si l'indicateur LED ne s'allume pas lorsque vous tirez le déclencheur)., 1. 2. 3. 4. 5. 6. 7. 8. , Fonctionnement de l'AR Blaster, 3, 2, Xtreme warrants its products for ONE YEAR against defects in manufacturing under regular consumer use with original receipt of retail purchase. We believe in our products and want to provide you with a replacement, if needed, but we have to know about the problem while the product is still under warranty. If you discover a defect covered by this warranty, please contact us about receiving a replacement. In order to use the products warranty the customer must provide proof of the retailers receipt. *Any customers outside of the U.S. will be responsible for shipping and handling charges if a replacement is required that is not due to a manufacturing defect. Xtreme’s warranty is limited to our products only. Our warranty does not cover the replacement or repair cost of any third-party accessory, electronic device or personal property. For instructions about how to obtain warranty service for your product, please contact Customer Service at [email protected] , Package Contents: Water Speaker with suction cup Charging Cable , ONe year warranty, MANUAL (ENGLISH) , 855-999-8041 \| www.XtremeCables.com, ar blaster, bluetooth device for augmented reality games, TM, TM, Double Sided, Black and White Copy, ARGUN, AR Gun, ARGUN, AR Gun, Battery Compartment (1), Expandable Smartphone Holder (6), Trigger (4), On/Off Button LED Indicator (4), Compartiment de la batterie (1), Support de Smartphone extensible (6), Gâchette (4), Indicateur LED du bouton marche / arrêt (4)	3
2017-07-10	3
HDMI cable , IR receiver, Charger, Remote Control, Product Overview, Android TV Box, OK, 1, 2 , 3 , 6, 7, 7 , 10 , 9 , 8 , SD CARD, AM-2, 10 , 9 , LAN, 7 , 10 , 9 , 5 , DC , Control, HDMI IN, HDMI OUT, OTG port , TF card slot , RECOVERY , AV , USB port, USB port, USB port, 5, TF, RECOVERY, OPTICAL AUDIO, SPDIF, Installation Introduction, Installation , Connect to TV With HDMI High-definiton output and AV Composite Video Output function, you can enjoy visual pleasure simply by connecting HPH Box and TV Set with HDMI High-definition video cable. , Start up After the Box Power on, please press the Box switch then Box system begins to start. , Completion ! Now please freely enjoy the Audio Visual experience of HPH Android TV Box. , Networking HPH Box Supports both Wireless Network Access. Wireless Access : Go to the “Network Setting” of HPH Box, select the available Wi-Fi hot point. , Ugoos UM4	3
USB, 1.Disc format support: CD,CD-R,CD-RW,MP3,WMA 2.Radio frequency: 87.5KHz-108.0MHz 3.Speaker: 45mm X 2 4.Rated impedance: 4Ω 5.Speaker output: 3W X 2 6.Power supply: AC110-220V,50KHz/60Hz 7.Power/Switch cable length: 2.3m 8.Dimension of main unit/package:189X189X37mm/290X205X48mm 9. Net weight/Gross weight: 540g/753g 10.Color: white/blue/pink , Fault 2:, Solution 1:, Short press ‘MODE’ button to shift into CD FM , USB, Press ‘MODE’ button for 3s to shift into bluetooth mode, MODE, Prev, FM/SH, USER MANUAL, pull to power on , 1.Cable-pulling switch:pull the power cable to turn on/turn off， convenient and creative 2.U-disk reading/playing 3.Full-band FM radio 4.Bluetooth 2.1 connection 5.Remote control 6.Standard 3.5mm input/output audioport,connecting earphone/speaker with a HIFI a quality sound 7.Support both mode of single song loop and whole disc loop 8.Support A-B repeat, Basic Functions, Basic Operation: 1. Connect the power/switch cable with the USB port adaptor,and plug adaptor,and plug-in the adaptor into the power socket. 2. Put the right format of CD disc into the player and make the power on by pulling the power cable of CD player.it will play music or other listening materials after 5-12s rotating(reading),press <Prev> or <Next> button on the player/remote to change songs,or you can press number buttons to select songs. 3. Press <Repeat> button to shift between single loop and whole disc loop mode. 4. Pull the power/switch cable again to turn off.Uder this operation,the music will stay in the playing current position. Accessories: 1. CD player X 1 2. 5V-2A USB adaptor X 1 3. Remote control X 1 4. Wall-mouted kit X 1 5. Wall-mounted plate X 1 6. User manual X 1, 1.Remote control does not work Make sure you’ve already removed the insulating sheet of battery on the remote control. Make sure the remote control aim at the suitable place:close to the switch cable on CD player Make sure the distance between remote control and the CD palyer is within 6 meters. Check if the batteries inside the remote control are dead. 2.The CD player does not work Check if the adaptor is connected with the socket successfully or the connection between adaptor and switch cable. If the player works under a situation with large temperature difference,the player and the laser head may produce mist and cause trouble.Please put aside the CDplayer for 1 hour,then turn on the power and shift into FM and press the VOL+ button on your remote control to turn up the volume. 3.CD function does not work Check if the format of your disc is the suitable one or if your disc is old or broken. Make sure the disc are placed correctly. WARRNING This player stand for the following CD formats ONLY: CD/CD-R/CD-RW/MP3/WMA It would automatically shift into FM mode if you play CD of other formats Special CD such as auti-copy CD and double layer disc may not work normally,please enquire from the CD seller. A cracked disc may lead to player’s malfunction.The signal face should be absolutely clean and without any label or tag., Trouble shooting, For A-B Repeat Function When playing a piece of listening material from the U disk or CD,you can press the A-B button on the remote twice to repeat the setence between this two times of short pressing.The sentence will be repeated all the time until press the A-B button again to cancel repeating For U-disk Function Plug the U-disk to the U-disk slot,press USB button on the remote or press the ‘M’button on the player until it shift into USB mode. , For Bluetooth Function Press the bluetooth button on the remote or press the ‘MODE’button on the player for 3s to shift into the Bluetooth model.Pair with the CD player’s Bluetooth ‘kecag’ with your mobile or pad.Then you can play music on your phone through the CD player ;Under this function the CD player play as a role of bluetooth speaker. For FM Function 1.Full-automatic searching:press the FM/SH button to shift into FM model first;Press the FM/SH button again,the radio channels will be saved automatically and users can choose the saved channels by the number buttons 1-6. Tips:(a).under this item,users can change channels by number buttons only.(b).Please wait for a relative long time after pressing the FM/SH button for the need time of automic searching process. 2.Semi-automatic searching :press the FM/SH button first to shift the player into the FM model;press the ‘Prev’ or the ‘Next’for 3 second (long press) to search the last or the next channel.Under this item ,only one channel will be searched for every press. Tips:Long press one of the number button to save the searched program you are listening,and you are able to play it by pressing the corresponding number button. For AUX Function Press the AUX btutton on the remote to shift into AUX model.Using a mattched audio cable to connect the CD play and mobile/pad/PC.Then you can listen to the material through the CD player.Then CD player works as a speaker under this function., Remote Function, Prev and Next, Bluetooth, Play or Pause, CD, Single / Whole disc loop, Repeat (follow), Power , VOL+/-, USB, FM /Searching, Number , AUX, Specifications:, Wall Mounted CD Player, Fault 1：, Solution 2:, Name: Tel: Add: Email:, Product name: Model: Seller: Sell date: Seller:, Warranty Card, Quick Instructions for Use, Plug the cd player on the stand ,according to the groove portion of the back cover of the machine , Or use 4 fixing screws to fasten the stand of the machine to the wall, Use 3 new type nails to fasten the stand of the machine to the wall , Installation instructions	3
Back, Front, Side View, 27.4 mm, 32.45 mm, 32.45 mm	3
©Disney	3
STI-R28PFR26PF	3
MODEL: CYR171 FCC ID: 2AHYTCYR171	3
FCC ID:2APNX-X10D	2
3	2

Latest 15 example files matching Text Layer Text metatag

URL	Name	Value
https://fccid.io/pdf.php?id=3958979	Text Layer Text	Bluetooth Earbud Pairing, 1. Turn on your phone Bluetooth Settings, 2.Starting with the earbuds off. Press and hold center power button DO NOT RELEASE until you hear ‘Power On,Pairing’ *This will take 8 seconds and there will be a pause between Power On and Pairing. You will also see flashing red and blue lights around the + button on the control console. , 3. Find device 008 in your Bluetooth settings. Select to connect., 4. You are now ready to listen to music or make calls using your Bluetooth Earbuds.
https://fccid.io/pdf.php?id=3957005	Text Layer Text	Bluetooth Earbud Pairing, 1. Turn on your phone Bluetooth Settings, 2.Starting with the earbuds off. Press and hold center power button DO NOT RELEASE until you hear ‘Power On,Pairing’ *This will take 8 seconds and there will be a pause between Power On and Pairing. You will also see flashing red and blue lights around the + button on the control console. , 3. Find device 008 in your Bluetooth settings. Select to connect., 4. You are now ready to listen to music or make calls using your Bluetooth Earbuds.
https://fccid.io/pdf.php?id=3955373	Text Layer Text	www.raybabay.us, @raybabyjournal, 7029-K Haycock Road, Falls Church, Virginia 22042 United States
https://fccid.io/pdf.php?id=3955372	Text Layer Text	www.raybabay.us, @raybabyjournal, 7029-K Haycock Road, Falls Church, Virginia 22042 United States
https://fccid.io/pdf.php?id=3955264	Text Layer Text	www.raybabay.us, @raybabyjournal, 7029-K Haycock Road, Falls Church, Virginia 22042 United States
https://fccid.io/pdf.php?id=3955263	Text Layer Text	www.raybabay.us, @raybabyjournal, 7029-K Haycock Road, Falls Church, Virginia 22042 United States
https://fccid.io/pdf.php?id=3884041	Text Layer Text	FCC ID:2APNX-X10D
https://fccid.io/pdf.php?id=3883993	Text Layer Text	FCC ID:2APNX-X10D
https://fccid.io/pdf.php?id=3867835	Text Layer Text	batchcode：PO# 20160609/078/00, Manufacturer: Shenzhen City Star point Import&Export Co., Ltd. Shenzhen Baoan District Fuyong Street Huaide Chui Po Kong Industrial Zone Fifth 31 1 floor, 1x AAA, 1x AAA, RF108, Open het batterij compartiment achteraan. Ouvrez le compartiment de piles à l'arrière de la souris., Plaats de batterijen zoals aangegeven, met de juiste polariteit. Haal eveneens de nano-receiver uit de muis.Placez les piles comme indiqué , dans le sens correct de la polarité. Retirez aussi le récepteur- nano de la souris., Plaats de nano-receiver in de USB poort van uw computerMettez le récepteur-nano dans le port USB de votre ordinateur, Met de DPI schakelaar kan u de gevoeligheid van de muis instellen .Avec l’interrupteur DPI vous pouvez régler la sensibilité de la souris.
https://fccid.io/pdf.php?id=3866541	Text Layer Text	Powered by ResourceXpress Designed and Manufactured in the UK - www.resourcexpress.com , TM, TM, Model Number: Qubi3 Model H Serial Number: Q3Hxxxxxx Power Supply: Micro USB FCC ID: 2AB38-QUBI3H This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
https://fccid.io/pdf.php?id=3862737	Text Layer Text	Powered by ResourceXpress Designed and Manufactured in the UK - www.resourcexpress.com , TM, TM, Model Number: Qubi3 Model H Serial Number: Q3Hxxxxxx Power Supply: Micro USB FCC ID: 2AB38-QUBI3H This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
https://fccid.io/pdf.php?id=3862687	Text Layer Text	Powered by ResourceXpress Designed and Manufactured in the UK - www.resourcexpress.com , TM, TM, Model Number: Qubi3 Model H Serial Number: Q3Hxxxxxx Power Supply: Micro USB FCC ID: 2AB38-QUBI3H This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
https://fccid.io/pdf.php?id=3861376	Text Layer Text	3
https://fccid.io/pdf.php?id=3860507	Text Layer Text	will have voice prompt and, PROGEAR
https://fccid.io/pdf.php?id=3849146	Text Layer Text	2AOWB

Text Layer Text

Meta Tag Information

Most Common Values for Text Layer Text

Latest 15 example files matching Text Layer Text metatag